Shanny SN600SC


Shanny SN600SC is a great E-TTL II and HSS enabled speedlite flash for both on and off-camera use. It is a great alternative to the higher priced Canon 580EX II and 600EX-RT flashes. For on-camera use, SN600SC is looking to be one of the best choices amongst inexpensive flashes currently available.

SN600SC is one of the most affordable Shanny flashes for both professional or advanced amateur Canon shooters. It is an excellent choice for on-camera use as well as off-camera use in combination with Yongnuo YN622C wireless triggers. The build quality is good and it feels solid. It is feature rich, supporting e-TTL (II), HSS, 2nd curtain sync, wireless and optical master and slave modes, auto and manual zoom, flash exposure compensation, flash exposure bracketing and much more.

SKU: snfc00002 Categories: , Tags: , , ,

Shanny SN600SC | Flash Speedlite for Canon

Shanny SN600SC is the current mid-range Shanny flash, and basically a slightly upgraded version of the basic SN600C model. SN600SC is a fully featured e-TTL (II) hot-shoe flash speedlite for Canon DSLR cameras. The SN600SC basically provides the functions of a Canon 580EX II, though wrapped in a newer body almost identical to the current Canon 600EX-RT Speedlite. Shanny SN600SC provides Canon Optic Wireless Master and Slave modes, as well as a Nikon Optic Wireless Slave mode option.

The SN600SC supports HSS (high-speed sync), 1st and 2nd curtain synchronization modes and has a high guide number of 60(ISO100, 200mm). For on-camera use, it provides nearly all of the functions of a Canon 600EX-RT, though for a small fraction of the price.

If you are looking for a great value flash for on camera work then the Shanny SN600SC is definitely one to consider. SN600SC flash is great for the money. When you factor in the price then it’s an absolute bargain. Shanny SN600SC is very impressive for the remarkably low price compared to the Canon 600EX-RT. The power can really match the Canon flash, and recycle is considerably faster. HSS provides more light than the 600EX-RT flash, and the SN600SC even outperformed the 600EX-RT in shots before heat protection cut in.

Shanny SN600SC is fully compatible with Canon E-TTL / E-TTL II metering. It features a powerful guide number of 60m (ISO 100, 200mm) as well as an impressive zoom range of 20-200mm, along with a wide-angle diffuser for 14mm coverage on full-frame cameras. Bounce lighting is also possible with tilt from -7 to 90° and rotation left and right 180°. The SN600SC TTL exposures are very good and quite consistent, bounced or direct. Flash Expsoure Compensation (FEC) adjustments are working as they should

SN600SC has a recycle time of about 2 seconds and has high-speed sync, 1st and 2nd curtain synchronization settings. Also, it supports a multi flash stroboscopic mode for multiple flashes during a single exposure. It runs on 4 AA batteries and comes with a mini stand and diffuser cover.

The build quality of the SN600SC (and all similar Shanny flashes) appears really excellent. The case is almost identical to the Canon 600EX-RT, though you can notice that the plastic is just a little bit less refined, and the main dial and buttons just a little harder to operate, which is still much better than you would expect from the speedlite flash of this price tag.

The SN600SC (and similar Shanny flashes) are still quite clearly matching the Canon 600EX-RT for light output though. So the Shanny flashes can really match the Canon 600EX-RT for power, where many other third party flashes are at at least 1/3 of a stop bellow.


  • Shanny SN600SC level lock clamping foot clamps tightly in the camera hot-shoe, and does not allow the flash to slop around any more than the original Canon flash does.
  • Interface and LCD screen display very similar to the original Canon 600EX-RT
  • PC sync port for wired off-camera firing
  • Optical transmission has access to 4 channels and 3 groups (A/B/C)
  • Built-in pull-out bounce card for reflecting light forward when the flash is tilted upwards
  • Manual power settings from 1/1 to 1/128 with 29 total levels
  • Stroboscopic mode of 1-199 Hz for 1-199 flashes
  • Power saving mode and overheat protection
  • Automatic setting saving remembers your last settings
  • Autofocus assist beam to help camera focus in low light conditions.
  • SN600SC has a very high Guide Number of 60m (ISO100, 200mm). It supports High-speed Synchronization, e-TTL and manual flash modes. The highest synchronization speed is 1/8000s.
  • Fast Clamping Metal Foot with Locking Pin
  • Supports Wireless Optical Master and Slave modes – The SN600SC can work as a master or slave unit in canon optical wireless system. It also supports S1 and S2 pre flash cancel modes.
  • SN600SC supports auto and manual zooming, the flash coverage can be changed between AUTO, 20~200mm.
  • Ultrafast charging recycle system. Also supports external power supply
  • Equipped with big size LCD display


Sync modeHSS, 1st curtain sync, 2nd curtain sync
Guide Number60 meters (ISO 100, 200mm)
Flash modee-TTL, Manual, MULTI
Optic wireless modeMaster and Slave modes for Canon Optical wireless system

Slave mode for Nikon optical wireless system

S1 and S2 basic optic slave modes

Optical triggering distanceup to 20m
Optical transmission channels4
Zoom range20, 24, 28, 35, 50, 70, 80, 105, 135, 200mm (14mm with wide angle diffuser card)
Vertical rotation angle-7~90 degrees  – tilt head with tilt lock button
Horizontal rotation angle0~360 degrees – full 360 degrees swivel head
Power supply4×AA size batteries (Alkaline or Ni-MH are supported)
Multiple flash groupsA/B/C flash groups
Flash ratio8:1 to 1:1 to 1:8
Recycle timefrom 1.8 seconds with fully charged batteries
Color temperature5600k
Flash duration1/200s~1/20000s
Flash control8 levels of output control (1/128~1/1), 29 levels of fine tuning
External interfacehot shoe, PC sync port, external battery port
Additional featuresHigh-Speed sync, Second-curtain sync, FEC, FEB, FEL, manual zoom,
auto zoom, sound prompt, custom settings, automatically saving setting, PC port,
power saving mode and over heat protection, large clear dot matrix LCD screen, LCD back light can be kept on
Dimensions79.7 x 142.9 x 125.4 mm
Net weight14.81 oz / 420 g (without batteries)


Shanny SN600SC is compatible with all Canon EOS cameras (e-TTL II autoflash): Canon 1Dx, 1Ds series, 1D series, 5DIII, 5Ds, 5Dsr, 6D, 7D mark II, 5DII, 5D, 7D, 70D, 60D, 50D, 40D, 30D, 20D, 700D, 650D/T4i, 600D/T3i, 550D/T2i, 500D/T1i, 450D/Xsi, 400D/Xti, 350D, 100D, 1100D, 750D, 760D, 1200D and other Canon EOS cameras

Shanny SN600SC – Package includes:

  • 1x Shanny SN600SC speedlite flash for Canon
  • 1x Mini stand
  • 1x Protection bag
  • 1x Manual in English and Chinese
  • 1x Original box
Additional information


Flash Sync


Flash Type


Reviews (0)


There are no reviews yet.

Be the first to review “Shanny SN600SC”