Yongnuo YN622N Kit | Wireless radio triggers for Nikon
Yongnuo YN622N Kit consists of Yongnuo YN622N-TX commander unit and YN622N receiver unit. This YN622N kit is a great entry to the advanced wireless flash control. Compatible with all Nikon i-TTL cameras, the controller slides directly into the hot shoe and utilizes a 2.4 GHz frequency with a range of 100m to trigger the remote flashes. The controller also has i-TTL, manual, and multi flash modes available for full creative control of a flash unit mounted on the YN622N Transceiver. Additionally, the system can utilize 7 channels and 3 groups for setting up multiple flash units easily and efficiently.
Yongnuo YN622N-TX utilizes an LCD screen to display settings and allow users to make adjustments. On the device is also an AF assist beam to help you focus in low-light conditions. Multiple sync modes are available for more specific needs or effects, including 1st and 2nd curtain sync and hss mode. A high-speed sync mode will help in bright lighting conditions and for stopping motion with a maximum speed of 1/8000 second. A built-in mini-USB port enables firmware updates to be installed, and the device runs on 2 AA batteries.
The transceivers have a hot shoe and PC sync port available for mounting a flash unit. The YN622N also utilizes a series of LEDs to display settings and allow users to make adjustments. On the device is also an AF assist beam to help in low-light conditions. Multiple sync modes are available for more specific needs or effects, including 1st and 2nd curtain sync. A high-speed sync mode is available when a flash is connected via the PC sync port and will help in bright lighting conditions and for stopping motion with a maximum speed of 1/8000 second. Additionally, the transceiver runs on 2 AA batteries.
Yongnuo YN622N kit can also be used to fire studio strobes. In order to connect YN622N receiver and studio strobe you will need sync cable. We recommend Yongnuo LS-PC635 sync cable for this purpose.
YONGNUO YN622N KIT FEATURES
- Yongnuo YN622N trigger and YN622N-TX commander cover a range of up to 100m.
- YN622N-TX commander allows you to control remote flash speedlite like it is on the camera.
- YN622N triggers can fire speedlites in TTL/Manual/Multi modes
- Mixed mode with TTL/Manuel controlled speedlites is also possible
- YN622N triggers are controlled using the flash menu of the camera or by using YN622N-TX controller which is far more better choice
- YN622N trigger and YN622N-TX commander are powered by 2x AA batteries (alcaline or NiMH)
- Transceiver-Design: a single trigger unit can be both transmitter and receiver
- Supports FEC, FEB, FEL, modeling-light
- Integrated auto focus assist light
- Support zoom lock for speedlites mounted to a receiver
- Triggers support HSS, 1st curtain and 2nd curtain sync
- Devices save settings so you don’t need to reconfigure them each time you power them on
- Ratio between flash groups A/B/C is supported
- 7 channels with 3 groups each available
YONGNUO YN622N-TX SPECIFICATIONS
| Frequency | 2.4GHz |
| Range | 328′ (100 m) |
| TTL Dedication | i-TTL |
| Channels | 7 |
| Groups | 3 (A,B,C) |
| Flash modes | TTL, manual, Multi |
| Sync mode | 1st curtain, 2nd curtain, high-speed sync |
| Max sync speed | 1/8000 sec |
| Interface | Triggering: Hot shoe, PC port Shutter Release: 2.5mm Firmware Upgrade: mini-USB |
| Battery | 2 x AA batteries |
| Battery life | Standby: 120 hours |
| Dimensions | 3.5 x 2.1 x 1.5″ (9.0 x 5.3 x 3.9 cm) |
| Weight | 2.9 oz (82 g) |
| Package Weight | 0.4 lb |
| Box Dimensions (LxWxH) | 5.4 x 4.2 x 2.1″ |
YONGNUO YN622N SPECIFICATIONS
| Frequency | 2.4GHz |
| Range | 328′ (100 m) |
| TTL Dedication | i-TTL |
| Channels | 7 |
| Groups | 3 (A,B,C) |
| Flash modes | TTL, manual, Multi |
| Sync mode | 1st curtain, 2nd curtain, high-speed sync |
| Max sync speed | 1/8000 sec |
| Interface | Output: Hot shoe, PC port Input: Hot shoe |
| Battery | 2 x AA batteries |
| Battery life | Standby: 60 hours |
| Dimensions | 3.5 x 2.1 x 1.5″ (9.0 x 5.3 x 3.9 cm) |
| Weight | 2.8 oz (78 g) |
| Package Weight | 0.6 lb |
| Box Dimensions (LxWxH) | 5.7 x 4.8 x 2.2″ |
YONGNUO YN622N KIT COMPATIBLE WITH:
Compatible cameras:
Yongnuo YN622N triggers are compatible with all Nikon DSLR cameras: Nikon D5, D4, D3X, D3S, D3, D2X, D800E, D800, D810, D750, D700, D610, D600, D300S, D300, D200, D7000, D7100, D7200, D90, D80, D5200, D5100, D5300, D5000, D3300, D3200, D3100, D3000, D60, D40X, D40 and any other newer Nikon DSLR camera
Compatible flashes:
Yongnuo YN622N triggera are compatible with all Nikon flash speedlites: SB400, SB600, SB700, SB800, SB900, SB910…
Yongnuo: YN465N, YN467N, YN468N(II), YN560II, YN560III, YN565N, YN568N, YN685 and other…
Flash speedlites of other brands are also compatible: Nissin, Metz, Shanny, Pixel…
Studio strobes:
You can use YN622N Kit to fire studio strobes. You will need sync cable to connect triggers and strobes. Please check our excellent LS-PC635 sync cable
Yongnuo YN622N KIT – Package includes:
- 1x Yongnuo YN622N-TX commander unit for Nikon
- 1x YN-622N Trigger for Nikon
- 1x N1 Shutter Release Cable
- 1x N3 Shutter Release Cable
- 1x Manual in English and Chinese
- 1x Original Yongnuo Box
Reviews
There are no reviews yet.