Yongnuo YN968C | Wireless enabled Speedlite flash for Canon
Yongnuo YN968C is the latest release in the line of Canon compatible speedlite flashes from famous Chinese manufacturer Yongnuo. It features an original case design (rather than a Canon 600EX-RT clone) with a built in adjustable LED light located under the flash head.
Yongnuo YN968C is powerful, radio-equipped speedlite flash which features an LED video light and aims to be one of the most versatile lighting solutions on the market. The flash is designed with support for Canon’s E-TTL / E-TTL II metering as well as compatibility with Yongnuo YN622 2.4 GHz radio triggering system, while it also has optical TTL slave modes that work with both Canon and Nikon units for maximum compatibility. Also, the LED light, which features a sliding diffusion panel, can output approximately 300 lux at 3.3′, making it useful for brightening up a video.
For illuminating your subjects, the YN968C offers a high guide number of 60m at ISO 100, 105mm and can zoom from 20-105mm for covering a variety of lenses. A pull-out diffuser is available to expand coverage to wide-angle 14mm lenses. Bounce lighting is simple with -7 to +150 degrees of tilt and 360 degrees of rotation, and through TTL communication it has access to high-speed sync, 1st and 2nd curtain sync. Additionally, the flash is equipped with a PC sync port, an external power port, and a USB port for firmware updates.
Unlike Yongnuo YN968EX-RT which is compatible with Canon’s 2.4GHz RT radio triggering system, YN968C is compatible with Yongnuo YN622C triggering system which means you can use this flash together with YN622C-TX master controller, YN622C II trigger or other flashes like Yongnuo YN685C which also comes with built-in YN622C receiver
There is an LED light on the side of the flash head, providing a source of continuous lighting for video work. The output is daylight-balanced and an clip-on orange filter is included to match it with incandescent ambient lighting.
Along with radio transmission and reception for wireless triggering, the wireless TTL master and slave functionality of this flash also extends to standard optical pulse triggering, where the YN968C is compatible with both Nikon and Canon flash systems. Also, it has a recycle time of about 3 seconds and has high-speed sync, 1st and 2nd curtain synchronization settings. Also, it supports a multi flash stroboscopic mode for multiple flashes during a single exposure. It runs on 4 AA batteries and comes with a case, mini stand and diffuser cover.
YN968C FEATURES
- Designed to support Canon E-TTL / E-TTL II metering with support for high-speed sync, 1st and 2nd curtain sync.
- Equipped with Yongnuo 2.4GHz YN622 radio triggering system that enables the YN968C to function as a TTL master or slave with Yongnuo YN685C and YN622C-TX. The flash can also function as an optical slave with support for TTL communication from both Canon and Nikon systems.
- Flash Groups – Radio A/B/C/D/E, Optic A/B/C
- Channels – Radio 1 – 15, Optic 1 – 4
- Sound Prompt
- Heat Protection
- LCD Back Light
- AF Assist Light
- Fast Clamping Foot
- Guide number of 60m (197′) at ISO 100 and 105mm.
- Zoom range of 20-105mm with pull-out diffusion panel for coverage of lenses as wide as 14mm.
- LED video light has maximum output of about 300 lux at 3.3′. A slide-out diffusion panel is available and the flash comes with a color conversion filter for changing the daylight-balanced 5500K LED to tungsten.
- Built-in bounce and diffuser cards.
- Recycle time of about three seconds at max power.
- Runs on four AA batteries (alcaline or NiMh are supported).
- PC sync and external power ports are available
- USB port for firmware upgrades.
YONGNUO YN968C SPECIFICATIONS
Circuit design | Insulated Gate Bipolar Transistor (IGBT) |
Guide Number | 60 meters (ISO 100, 105mm) |
Flash mode | HSS, TTL, M, MULTI, GR |
Triggering Mode | Set-top, wireless master mode, wireless slave mode, Optical master mode, Sc, Sn, S1, S2 |
Wireless triggering distance | 20~25m indoor, 10~15m outdoor |
Zoom range | 20, 24, 28, 35, 50, 70, 80, 105mm |
Vertical rotation angle | -7~150 degrees |
Horizontal rotation angle | 0~360 degrees |
Power supply | 4×AA size batteries (Alkaline or Ni-MH are supported) |
Lighting times | 100~1500 times (AA alkaline cell used) |
Recycle time | approx 3s (AA alkaline cell used) |
Color temperature | 5600k |
Flash duration | 1/200s~1/20000s |
Flash control | 8 levels of output control (1/128~1/1), 29 levels of fine tuning |
External interface | hot shoe, PC port, USB port |
Additional features | Master flash, High-Speed sync, Second-curtain sync, FEC, FEB, FEV, manual zoom, auto zoom, sound prompt, advanced setting, automatically saving setting, PC port, power saving mode and over heat protection |
Dimensions | 3.1 x 2.4 x 8.1″ / 78.0 x 60.5 x 206.0 mm |
Net weight | 15.34 oz / 435 g |
YN968C – COMPATIBLE WITH:
YN968C is compatible with all Canon EOS cameras (e-TTL II autoflash): Canon 1Dx, 1Dx mark II, EOS R, EOS RP, 1Ds series, 1D series, 5D mark IV, 5DIII, 5Ds, 5Dsr, 6D, 7D mark II, 5DII, 5D, 7D, 70D, 60D, 50D, 40D, 30D, 20D, 700D, 650D/T4i, 600D/T3i, 550D/T2i, 500D/T1i, 450D/Xsi, 400D/Xti, 350D, 100D, 1100D, 1000D, 750D, 760D, 1200D and other Canon EOS DSLR and Mirrorless cameras
Yongnuo YN968C – Package includes:
- 1x Yongnuo YN968C speedlite flash for Canon
- 1x Protection bag
- 1x Mini Stand
- 1x Manual in English and Chinese
- 1x Original box
Reviews
There are no reviews yet.