Yongnuo YNE3-RX


Yongnuo YNE3-RX is the first Canon RT radio compatible receiver unit, now opening the system up to include legacy ETTL slave flash units like the previous Canon 580EX II. This receiver also allows manual studio lights or speedlites to be fired when using RT transmitter unit as well. This means that non RT speedlites like the Canon 580EX II or YongNuo YN-568EX II can now act as RT compatible slave flashes when using the Canon ST-E3-RT / YN-E3-RT, or 600EX-RT / YN600EX-RT as a transmitter. A lack of separate receiver unit has previously been the biggest limitation to the industry leading Canon RT radio flash system so now Yongnuo are bridging together 2 of Canon’s completely separate, and previously incompatible, radio flash systems with the YN-E3-RX receiver

SKU: yntc00005 Categories: , Tags: , ,

Yongnuo YNE3-RX | Wireless flash receiver for Canon RT system

Yongnuo YNE3-RX is the world’s first E-TTL wireless flash receiver for Canon’s new RT flash system. It makes all E-TTL flashes compatible with RT master units like Canon 600EX-RT / Yongnuo YN600EX-RT, and commanders as ST-E3-RT and YN-E3-RT.

Yongnuo YN-E3-RX allows you to remotely trigger any compatible E-TTL flash speedlite/studio strobe with this receiver and Yongnuo or Canon commander unit. As a commander unit you can use Canon ST-E3-RT controller, Yongnuo YN-E3-RT controller or flash speedlites with master mode like Canon 600EX-RT (II), Yongnuo YN600EX-RT (II), YN968EX-RT… The receiver has a 1/4″-20 female mounting thread, a female hot shoe, and USB port for firmware upgrades. Operating on the 2.4 GHz frequency, the receiver has 15 channels to prevent interference and can wirelessly trigger flash units in any of its 5 groups singly or combined at distances up to 100m. The user-friendly LCD screen allows monitoring of channel and groups in use, battery level and +/- flash exposure compensation. It also indicates E-TTL, Manual or Multi (stroboscopic) flash mode selection. The Yongnuo YN-E3-RX runs for a total of 24 hours on 2 separately purchased AA batteries.


  • Yongnuo YNE3-RX is a wireless flash receiver that works within area of 100 square meters( without interference).
  • Supports flash modes: E-TTL, Manual, MULTI.
  • 15 Physical Channels, 1 Auto Channel, Up to 10,000 customizable photographers ID
  • Supports remote shutter release function and test flash.
  • Supports single contact flash triggering.
  • Has PC output interface. Supports USB upgrades
  • LCD display shows flash mode, flash output power, ID and so on for easy operation.
  • Comes with a cable and an adapter plug to match your needs better.
  • Settings saved automatically


Frequency2.4GHz (2405 – 2475 MHz)
Range328′ (100 m)
TTL DedicationE-TTL / E-TTL II
ChannelsAuto, channel 1-15
Wireless radio ID:0000-9999
Groups5 (A,B,C,D,E)
USB firmware upgradeYes/Supported
Battery2x AA alkaline batteries/ NiMH batteries (not included)
Battery life 24 hours with 1 set of batteries
Dimensions 9 x 5 x 2.5cm / 3.5 x 2 x 1in
Weight 73g / 2.6oz
Package Weight 152g / 5.4oz
Box Dimensions (LxWxH) 10 x 8 x 6.5cm / 3.9 x 3.1 x 2.5in


Compatible transmitters (master units):

  • Yongnuo YN-E3-RT
  • YN600EX-RT
  • Canon ST-E3-RT
  • Canon 600EX-RT

Compatible E-TTL flash speedlites:

  • Canon – 580EX II, 430EX II, 320EX, 270EX II…
  • Yongnuo YN568EX (II), YN-565EX (II), YN-468EX II, YN-467EX II, YN-465EX, YN500EX…
  • All other E-TTL flash speedlites

Yongnuo YNE3-RX – Package includes:

  • 1x Yongnuo YNE3-RX wireless receiver
  • 1 x LS-PC635 sync cable
  • 1 x Adapter Plug
  • 1x Manual in English and Chinese
  • 1x Original Yongnuo Box
Additional information


Trigger Sync


Trigger Type


Reviews (0)


There are no reviews yet.

Be the first to review “Yongnuo YNE3-RX”